パンくずリスト

Tips: Stereo music headphones (中華イヤホンの取説) (2024/08/28) (作成中)

Stereo music headphones (中華イヤホンの取説)

AliExpressで、250円くらいで買ったイヤホンの取説です。

AIで日本語訳した中華イヤホンの取説

安全ガイドライン

  1. デバイスを分解したり改造したりしないでください。そうしないとヘッドセットが故障したり焼損したりする可能性があります。
  2. デバイスを液体から遠ざけてください。デバイスを液体に入れないでください(そうしないとデバイスが重大な損傷を受ける可能性があります)。
  3. デバイスを高温(45℃以上)にさらさないでください。また、温度が低すぎる環境でも使用しないでください。そうしないとデバイスが異常動作し、信号が途切れる可能性があります。
  4. ヘッドフォンを1A以上の充電器で充電しないでください。
  5. モバイル電源を使用して充電しないでください。そうしないとヘッドセットが故障したり焼損したりする可能性があります。
  6. 1A以上の充電器を使用しないでください。そうしないとヘッドセットが故障したり焼損したりする可能性があります。


始めるために


  1. オーバーイヤーヘッドセットのケースを開けてください。
    ヘッドセットを1つ取り出して自動的に電源が入ります。
    ヘッドセットを初めて使用する前に完全に充電してください。電源を入れてください。充電コンパートメントの両端を押し続け、
  2. ペアリング:両方のヘッドセットをオンにした後、片方のヘッドセットを耳に入れ、耳たぶを完全に覆ってください。両方のヘッドセットを左右に伸ばすと、ヘッドセットのライトが点滅し、接続が成功したことを示します。
  3. ワイヤレスペアリング名を検索して接続してください。接続に失敗した場合はヘッドセットを充電コンパートメントに戻して再接続してください。次回の再起動では、Bluetoothがオフになっていない限り、最後にペアリングしたデバイスに自動的に接続されます。

機能説明

  • 再生/一時停止
    音楽状態でL/Rイヤホンを1回タップします。
  • 次の曲を再生
    音楽状態でL/Rイヤホンを2回タップします。
  • 音量調整
    音楽状態でL/Rイヤホンを3回タップします。
  • 電話に出る
    着信時にL/Rイヤホンを1回タップします。
  • 電話を拒否
    着信時にL/Rイヤホンを2秒間押し続けます。
  • 音声アシスタント
    接続状態で任意のイヤホンを2秒間押し続けて音声アシスタント状態に入ります。

FAQ

なぜ片方のイヤホンしか音が出ないのか?
A: 両方のイヤホンを充電ケースに戻し、カバーを閉じて充電し、その後取り出してイヤホンモードが復元されるか確認します。復元されない場合は、工場出荷時の設定に戻すことで解決できます。
電話がイヤホンに接続できないのはなぜか?
A: 電話でペアリングされたTWSを削除し、再度接続をペアリングします。
音楽/通話が聞こえないのはなぜか?
A: Android電話の場合、電話接続記録の右側に設定アイコンがあります。クリックして入力し、2つのオーディオオプションのチェックを外して再選択します。電話が一般的な支援機能を設定してオーディオ通話モードに入り、自動を選択します。すでに自動の場合は他の問題です。自動に変更した後、ペアリング記録を削除して再接続を試みます。
遅延/中断が発生するのはなぜか?
A: イヤホンを使用している場合、周囲に多数のWi-Fiデバイス、4G信号、高出力の家電製品などがあると干渉が発生し、遅延や中断が発生することがあります。環境を変更するか、再ペアリングすることで正常に戻ります。

注意事項

安全認証を受けた正式な充電器を使用してください。
イヤホンを使用する際は、適切な音量に調整して聴力を保護してください。
製品を正しく使用し、落下や強い圧力を避けてください。
子供が使用する場合は、大人が同伴し、誤飲を避けてください。
高温や湿度の高い極端な環境を避けてください。
本製品を分解しないでください。

AIでOCRした中華イヤホンの取説

Stereo music headphones

Safety guidelines:

  1. Do not disassemble or modify the device for any reason, otherwise the headset may fail or burn.
  2. Keep the device away from liquid; otherwise, the device may be seriously damaged.
  3. Do not place the device in an environment where the temperature is too low or too high (below 0°C or above 45°C).
  4. Do not use the device during thunderstorms. Thunderstorms may cause abnormal operation of the device and signal interruption.
  5. Do not use mobile power to charge, otherwise it may cause the headset to malfunction or burn.
  6. Do not use a charger above 1A to charge, otherwise it may cause the headset to malfunction or burn.

To get started:

  1. Open the cover of the charging compartment,
    take out the headset and turn on the headset automatically.
    The headset breathing light blinks and enters the automatic connection state,
    and one of the headset lights is off or blinks quickly and slowly,
    indicating that the team is successfully formed.
  2. Search for the wireless pairing name and click Connect.
  3. search for the wireless pair name, you can connect, if the connection fails put the headset back to charge
  4. After the headset is turned on, after the device is connected for the first time, the next headset restart will automatically connect to the last paired device

【Function description】

  • Play/pause
    Music Tap the L/R earphone once in the music state
  • Play the next piece of music
    In the music state, tap the L/R headset 2 times
  • Volume adjustment
    In the music state, tap L/R volume 3 times
  • Answer the phone
    When a call comes in, tap the L/R headset once
  • Reject a call
    When an incoming call comes in, press and hold the L/R headset for 2 seconds
  • Voice assistant
    In the connected state, hold down any headset for 2 seconds and release to enter the voice assistant state

【Light flashing indicator】

Headphone charging: the headphone is charged automatically in the charging box. The charging indicator is red. The charging indicator is blue when the headphone is fully charged.

光点滅インジケーター

ヘッドフォンの充電:ヘッドフォンは充電ボックス内で自動的に充電されます。充電インジケーターは赤色です。ヘッドフォンが完全に充電されると、充電インジケーターは青色になります。

F&Q

  1. Why only one headset has sound?
    A: Put the two headphones back into the charging bin at the same time, close the cover to charge, and then take out to see whether to restore the ear mode if not restored, restore the factory Settings can be solved
  2. Can't the phone connect to the headset?
    A: Delete the TWS paired on the phone, and then pair the connection
  3. How to listen to music/call without sound?
    A. Android phones have a Settings icon on the right of the phone connection record, click Enter, uncheck the two audio options and select again.The phone is setting the general assistance function to enter the audio call mode,Select automatic, and if it's already automatic, it's something else,Then after changing to automatic, delete pairing records and reconnect attempts if not recovered
  4. Why are there delays/interruptions?
    A: If you use headphones, there are a large number of Wi-Fi devices, 4G signals, high-power appliances and so on around the interference, there may be a delay, intermittent situation, replace the environment or re-pair the connection can be restored to normal

Matters needing attention

  1. please use a formal source of safety certification charger for charging
  2. when using headphones, adjust the volume of the right amount to avoid damage to hearing
  3. the correct use of products to avoid falling or heavy extrusion
  4. Children should be accompanied by adults to avoid ingestion
  5. away from extreme environments such as high temperature or humidity
  6. Do not disassemble this product




前のページ
No Comment
Add Comment
comment url